泰芯开发者社区
泰芯开发者社区
T

manhere (@tx4299)

帖子

最新 最佳 有争议的
  • 固件加载错误
    T manhere
    <p dir="auto"><img src="https://taixin-semi.com/upload/image/20260126/6390504863731543316375022.png" alt="ScreenShot_2026-01-26_182311_424.png" class=" img-fluid img-markdown" /></p>
     TXW8301
  • 固件加载错误
    T manhere
    <p dir="auto">H模组这边是正常的启动了么？是否有带flash呢？</p> <hr /> <p dir="auto">识别到hg0设备应该是正常启动，并且可以通讯了，只是日志大量报错</p> <p dir="auto">flash是外置的Winbond 25Q80D，通过串口烧录固件也没问题，已经刷入最新的v2.4.1.5-39777，insmod后也能识别打印出版本来，问题还是出在驱动上</p> <p dir="auto">有劳指教下</p>
     TXW8301
  • 固件加载错误
    T manhere
    <p dir="auto">测试环境为openwrt 24.10，硬件mt7688an，加载驱动后日志如下：</p> <p dir="auto">Fri Jan 9 15:27:31 2026 kern.warn kernel: [ 918.024971] hgic_bootdl_cmd_enter:290::failed! ret:2</p> <p dir="auto">Fri Jan 9 15:27:31 2026 kern.warn kernel: [ 918.078890] hgic_bootdl_cmd_rsp_handle:102::Checksum error,return HG_BOOTDL_ERR_RSP_PACKET!</p> <p dir="auto">Fri Jan 9 15:27:31 2026 kern.warn kernel: [ 918.095704] hgic_bootdl_send_cmd_tmo:250::cmd 0, error:2</p> <p dir="auto">Fri Jan 9 15:27:31 2026 kern.warn kernel: [ 918.106458] hgic_bootdl_cmd_enter:290::failed! ret:2</p> <p dir="auto">Fri Jan 9 15:27:31 2026 kern.warn kernel: [ 918.288022] hgicf_delay_init:850::delay_int run again!</p> <p dir="auto">Fri Jan 9 15:27:31 2026 kern.warn kernel: [ 918.299439] hgicf_download_fw:747::Enter</p> <p dir="auto">Fri Jan 9 15:27:31 2026 kern.warn kernel: [ 918.323702] hgic_bootdl_cmd_rsp_handle:102::Checksum error,return HG_BOOTDL_ERR_RSP_PACKET!</p> <p dir="auto">Fri Jan 9 15:27:31 2026 kern.warn kernel: [ 918.340588] hgic_bootdl_send_cmd_tmo:250::cmd 0, error:2</p> <p dir="auto">Fri Jan 9 15:27:31 2026 kern.warn kernel: [ 918.351549] hgic_bootdl_cmd_enter:290::failed! ret:2</p> <p dir="auto">Fri Jan 9 15:27:31 2026 kern.warn kernel: [ 918.413086] hgic_bootdl_cmd_rsp_handle:102::Checksum error,return HG_BOOTDL_ERR_RSP_PACKET!</p> <p dir="auto">Fri Jan 9 15:27:31 2026 kern.warn kernel: [ 918.429911] hgic_bootdl_send_cmd_tmo:250::cmd 0, error:2</p> <p dir="auto">如此反复。。。</p> <p dir="auto">固件文件hgicf.bin用串口烧录是没问题的</p>
     TXW8301
  • 固件加载错误
    T manhere
    <p dir="auto">感谢解答，主楼提到的firmware升级报错的问题如何解决呢？目前尝试修改hgic_bootdl_cmd_hdr里定义unsigned char addr[4]为unsigned char addr[8]，仍然无法完成fw_file的成功写入。</p>
     TXW8301
  • 固件加载错误
    T manhere
    <p dir="auto">Thu Jan 8 20:11:31 2026 kern.warn kernel: [ 202.900434] hgicf_rx_fw_event:47::event id:7</p> <p dir="auto">Thu Jan 8 20:11:31 2026 kern.warn kernel: [ 202.909114] hgicf_rx_fw_event:70::event list is full (max 16), drop old event</p>
     TXW8301
  • 固件加载错误
    T manhere
    <p dir="auto">怀疑版本差异过大，尝试将模块固件升级到了最新的v2.4.1.5-39777，配合驱动版本：taixin-fmac-linux-driver-v2.2.1-38772，仍然出现大量log：</p> <p dir="auto">[ 994.221985] hgicf_rx_fw_event:70::event list is full (max 16), drop old event</p> <p dir="auto">结合日志应该是驱动一直在尝试download_fw造成，虽然按照手册”泰芯Linux_WiFi_FMAC驱动开发指南.pdf“，加载驱动时并未指定fw_file=xxx.bin但是驱动并未判断文件是否真实存在，一直尝试加载默认的hgicf.bin。。。</p> <p dir="auto">期待修复</p>
     TXW8301
  • 固件加载错误
    T manhere
    <p dir="auto">另外，日志中出现大量的</p> <p dir="auto">[ 994.221985] hgicf_rx_fw_event:70::event list is full (max 16), drop old event</p> <p dir="auto">固件版本：hgic fw info:1.5.9.5, svn version:19932, app version:0</p> <p dir="auto">驱动版本：taixin-fmac-linux-driver-v2.2.1-38772 编译ko</p>
     TXW8301
  • 固件加载错误
    T manhere
    <p dir="auto">使用taixin-fmac-linux-driver-v2.2.1-38772编译驱动使用，加载hgSDK-v1.6.4.5-39706-fmac编译出的固件时出现大量报错</p> <p dir="auto">[ 584.149683] hgic_bootdl_cmd_rsp_handle:102::Checksum error,return HG_BOOTDL_ERR_RSP_PACKET!</p> <p dir="auto">[ 584.166557] hgic_bootdl_send_cmd_tmo:250::cmd 0, error:2</p> <p dir="auto">[ 584.177113] hgic_bootdl_cmd_enter:290::failed! ret:2</p> <p dir="auto">[ 584.266661] hgic_bootdl_cmd_rsp_handle:102::Checksum error,return HG_BOOTDL_ERR_RSP_PACKET!</p> <p dir="auto">[ 584.283506] hgic_bootdl_send_cmd_tmo:250::cmd 0, error:2</p> <p dir="auto">硬件固件版本：hgic fw info:1.5.9.5, svn version:19932, app version:0</p> <p dir="auto">===================================================</p> <p dir="auto">另外，hgic_def.h文件hgic_bootdl_cmd_hdr里定义unsigned char addr[4]，在实际fwdl.c文件中却有</p> <p dir="auto">#define BOOT_CMD_KEY "@huge-ic"</p> <p dir="auto">#define BOOT_CMD_KEY_SIZE 8</p> <p dir="auto">造成274行 memcpy((void *)cmd_hdr->addr, (void *)BOOT_CMD_KEY, BOOT_CMD_KEY_SIZE);</p> <p dir="auto">报错</p> <p dir="auto"> [ 28.861988] memcpy: detected field-spanning write (size <img src="https://dev.taixin-semi.com/assets/plugins/nodebb-plugin-emoji/emoji/android/1f60e.png?v=1213dfaf722" class="not-responsive emoji emoji-android emoji--sunglasses" style="height:23px;width:auto;vertical-align:middle" title="8)" alt="😎" /> of single field "(void *)cmd_hdr->addr" at /hgic_fmac/utils/fwdl.c:274 (size 4)</p>
     TXW8301