跳转至内容
  • 23 主题
    75 帖子
    T
    ============================================================ Morse Micro <-> TaiXin IP Allocation Issue Summary [ Current Situation ] AP : Morse Micro MM8108-EKH05 STA : TaiXin AH Module Symptom: Unable to obtain IP address (DHCP failure) Cause : "Invalid group cipher (0)" -> Connection fails at WPA authentication stage [ Problem Flow ] TaiXin STA -> Scans for Morse Micro AP (SSID found) | v Attempts WPA Authentication | v Invalid group cipher (0) <-- Security spec mismatch | v Association Timeout | v Disconnect -> Retry Loop | v Result: No IP address assigned (fails before DHCP stage) [ Root Causes ] TaiXin module is running in proprietary protocol mode (wnbsta) Morse Micro AP supports only standard WPA2-PSK Not compatible with TaiXin's proprietary PAIR mode Failure to parse security specifications TaiXin cannot parse the WPA2 security header from the Morse Micro AP Result: group cipher = 0 (unrecognized) Consequently, failure occurs at the Association stage IP allocation (DHCP) happens only after successful Association Therefore, this is NOT an IP issue, but a connection-stage issue log data "-------------------<CR><LF> [1051276]LMAC STATUS:<CR><LF> local: ce:4f:26:8f:aa:88 AID= 0 mode= 0(0/1:STA;2:AP)<CR><LF> freq= 916.0 bw=1 bgr=-106 dc=0:0(5:44) <CR><LF> chn: 908.0 916.0 924.0 <CR><LF> bgr: -60 -60 -60 <CR><LF> buf: free=65 tq=0 sq=0 <CR><LF> irq: ac=42 bkn=0 bo(rts:frm)=0:0:0:0:42 to(rts:frm)=0:0 rx=52<CR><LF> tx : cnt=42 dly=0:0ms est_rate=900kbps txp=0 fail=0 drop=0 <CR><LF> rx : cnt=52 bus=0ms<CR><LF> cca: st12= 0:0 mid1224= 0:0:0:0<CR><LF> chip-temperature:36, vcc:3.37, vdd13b:1.35, vdd13c:1.34<CR><LF> sta_list: no sta<CR><LF> <CR><LF> <ESC>[1051550]ieee80211_sta_select_bss:24::by SSID find hgic_ah_test [50:2e:91:d2:c4:c9] at channel 2<CR><LF> <ESC>[1051559]vif1 state WPA_SCANNING -> WPA_AUTHENTICATING<CR><LF> [1051569]Invalid group cipher (0).<CR><LF> [1051570]vif1 state WPA_AUTHENTICATING -> WPA_ASSOCIATING<CR><LF> <ESC>[1052476]ieee80211_sta_assoc_timeout:53::connect to ap 50:2e:91:d2:c4:c9 timeout, disable it!<CR><LF> <ESC>[1052484]ieee80211_sta_disconnect LR= 0x20048df4. 50:2e:91:d2:c4:c9<CR><LF> [1052490]lmac set GTK: cmd=1 addr=50:2e:91:d2:c4:c9 cipher= 0x0 flags= 0x0 keyidx= 0 keylen= 0<CR><LF> [1052498]del_STA: addr=50:2e:91:d2:c4:c9<CR><LF> [1052502]stamap=0x0<CR><LF> [1052503]sleepmap=0x0<CR><LF> [1052505]vif1 state WPA_ASSOCIATING -> WPA_DISCONNECTED<CR><LF> [1052511]vif1 state WPA_DISCONNECTED -> WPA_AUTHENTICATING<CR><LF> [1052516]vif1 state WPA_AUTHENTICATING -> WPA_SCANNING<CR><LF> <CR><LF> "
  • 23 主题
    61 帖子
    T
    @tx2795 是不是烧录协议也自己写,烧录也能在mac实现了?
  • 0 主题
    0 帖子
    没有新主题
  • SDK、驱动、工具链与系统适配

    3 4
    3 主题
    4 帖子
    T
    你好。我想在我的项目中使用TX8C1010。我应该使用什么软件来编程和编译它。在我的KeilC中没有这个芯片。有没有人有示例项目?
  • 开发板、原理图、接口与硬件调试

    1 3
    1 主题
    3 帖子
    T
    没有lite的这个,是我们曾用用来烧录其他非wifi产品的;带lite的这个是烧录wifi产品的; 您通过淘宝渠道,没要到相关的资料?
  • 4 主题
    6 帖子
    T
    大神们哪个ic完美兼容积木编程呢